Fire extinguishers - Import export

Fipron-Cord — innovative independent fire extinguishing mean compound of composite materials. It represents a mix of microcapsules with an inner heating agent. When exposed to fire, a heating agent in a cord enables followed by a chemical reaction through the whole length of cord. Such reaction comes with heat impact that leads to explosion of all microcapsules and release fire heating substance. Fipron Cord product can be installed together with a high voltage electric cable in closed cable ducts located both indoors and outdoors with an operating temperature from minus 50 ° C to plus 80 ° C.

PiroStiker based on microencapsulation technology. PiroStiker contains inside dozens of thousands of microcapsules filled with fire extinguishing agent which enables if reached the determinate temperature and fire occurrence takes place. In case of fire, the microcapsule explodes discharging the extinguishing gas, which displace oxygen, chill the surface and suppress fire. Fire extinguishing agent is ecologically safe, it doesn’t cause harm to human’s health and doesn’t damage equipment.

AUPT GRIB is designed for fire extinguishing of electrical cabinets, electrical panels in residential and industrial premises. The device is made of modern ecological material and equipped with a magnetic holder. For installation, simply magnet the "Grib" to a metal surface inside your control cabinet. Inside the device there are macrocapsules are filled with a perfect extinguishing agent, the so-called "dry water". When heated, the capsule is destroyed, and the extinguishing composition extinguishes fires.

Aerosol generator “MAG” is intended to extinguish fire of A,B,C and E classes in enclosed spaces. The extinguishing agent is safe for human and doesn’t require people evacuation. The fire extinguishing occurs due to a chemical reaction therefore interfering in combustion process with no oxygen isolation. The actuation of the generator occurs by means of linear heat detection under given temperature (short circuit of electric buttery takes place) or by means of Fipron-Cord when placed in the seat of fire.

In order to keep your business, staff and customers safe from fire damage and prevent harm, trust Arch Fire Systems to install, commission, maintain and inspect your Fire Extinguishers in Plymouth, Devon & Cornwall, from Land’s End, right through to Barnstaple.

Fire extinguishers: Powder fire extinguishers, CO2 fire extinguishers, Foam fire extinguishers. The extinguishers type P - powder, type G - gas and SM - mechanical foam are permanently pressurized and designed to extinguish the beginnings of fires for all types of outbreaks. - P type extinguishers (powder): P1, P2, P3, P4, P6, P9, P12, P25, P50, P100, P150; - SM type fire extinguishers (mechanical foam): SM2, SM3, SM6, SM9, SM25, SM50, SM100, SM150; - Extinguishers type G (CO2): G2, G5, G10, G20, G30, G50

Cartridge cradle Suitable for 380ml to 410ml 5:1 coaxial cartridges Application example: using 380ml to 410ml 5:1 coaxial cartridges such as 5:1 fire-extinguishing foam cartridges. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 38 380ml 2K composite mortar cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPS-4C2-10.8V Li-Ion 1 cartridge press for 380ml to 410ml 5:1 coaxial cartridges 1 battery pack 10.8V Li-ion 1 rap

Cartridge cradle, suitable for 310ml 1:1 coaxial cartridges as well as 310ml 1K cartridges Application example: Using 310ml 1:1 coaxial cartridges of e.g. fire-extinguishing foam. Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 38 310ml 2K composite mortar cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPS-3C1-10.8V Li-ion 1 cartridge press for 310ml 1:1 coaxial cartridges 1 battery pack 10.8V Li-ion 1 rapid charger w

FINFIRE is new generation fire extinguishers. FINFIRE "SPHERE" - autonomous powder fire extinguishing device to extinguish without human intervention fires of solid, liquid and gaseous substances, as well as electrical equipment under voltage: A, B, C, E classes. FINFIRE "SPHERE” is used in warehouse, technological, household premises, garages, apartments, shops, vehicles, and other places. Used as portable fire extinguishers or in addition to them. Extremely simplified design does not require special skills and great physical effort which helps to significantly save time in critical situations. The devices consist of a polystyrene body filled with fire extinguishing powder. Fire-conducting cords run along the edges of the body. The cords will activate the device upon contact with fire. Within 10 seconds after triggering, a pop is heard (additional warning signal). At the same time, the housing ruptures and the extinguishing powder is ejected.

FINFIRE is new generation fire extinguishers. FINFIRE "TAB" - autonomous powder fire extinguishing device to extinguish without human intervention fires of solid, liquid and gaseous substances, as well as electrical equipment under voltage: A, B, C, E classes. FINFIRE "TAB” is used in warehouse, technological, household premises, garages, apartments, shops, vehicles, and other places. Used as portable fire extinguishers or in addition to them. Extremely simplified design does not require special skills and great physical effort which helps to significantly save time in critical situations. The devices consist of a polystyrene body filled with fire extinguishing powder. Fire-conducting cords run along the edges of the body. The cords will activate the device upon contact with fire. Within 10 seconds after triggering, a pop is heard (additional warning signal). At the same time, the housing ruptures and the extinguishing powder is ejected.

Autonomous fire extinguishing system Hyperbola is designed to extinguish without human intervention class A, B fires and electrical equipment under voltage in objects of protection of small volume from 0.03 to 2.2 m3, located in rooms with operating temperatures from minus 40 ° С to plus 60 ° С and relative air humidity up to 98 percent at a temperature of + 25 ° С. The product is a sealed tube made of a special polymer material filled with a liquid extinguishing agent (GFFS) - a liquefied mixture based on organofluorine substances, sealed at both ends. The unit has overpressure inside the housing. The polymer material provides reliable storage of the extinguishing agent and its release under strictly defined conditions.

PiroStrel - a system of remote extinguishing. PiroStrel is an automatic thrower with extinguishing fillers. Each filler contains extinguishing substance inside of the polymeric cover. “Dry water” is used as a filler. This substance is completely safe for human and environment as well as it doesn’t damage your property. Due to its non- conducting features it can be used for extinguishing objects under voltage up to 35kW. The thrower shoots fillers on the distance up to 100 m. It's particularly important since in most cases it’s difficult to get closer to the seat of fire using a standard fire extinguisher. PiroStrel’s rate of fire is 300 shoots per minute. In one minute, the thrower can provide the seat of fire with the amount of fire-extinguishing substance capable to cope with up to 100 m3 of fire surface.

Ensure that you’re protected with the highest quality fire detection and extinguishing facilities with the help of the London City Fire & Electrical Group. Our team is experienced in every facet of fire alarm system design, installation, and service. All fire detection and alarm systems must be regularly serviced in order to highlight any potential faults and to provide the preventative maintenance that keeps them reliable for the foreseeable future. Let us help you ensure you’re giving your fire safety systems the care they need. In order to make our services as accessible as possible, we offer a free quotation, as well as a price match guarantee to provide you with more value than anyone else in the industry.

- Real fire / explosion scenario modelling - Pollutant atmospheric scattering modelling - Smoke spread studies - Structural fire behavior engineering - Fire behavior of construction products - Fire spread and protection buildings - Egress condition modelling - Peer review of environmental study (critical analysis) - Fire risk assessment - Fire extinguishment modelling (CFD)