Heating - Import export

We provide expert heating services are widely used in a variety of industries, including commercial, industrial and residential projects. We provide comprehensive heating solutions, with our experts working to optimize energy-efficient systems. We carry out installations of modern heating technologies, including underfloor heating, radiators and hot water systems. We focus on providing efficient, reliable and environmentally friendly solutions for every project, with an emphasis on comfort and energy savings for the end user.

Temperature control of gaseous and liquid media Flat tube heat exchangers are generally used as air / air or air / liquid heat exchangers. Flat tube heat exchangers are used where the (exhaust) air is polluted and the installation space is limited. In heat recovery in particular, there are numerous applications for flat tube heat exchangers as so-called exhaust gas / exhaust air heat exchangers. Little installation space and less pressure loss While the rows of tubes in smooth tube heat exchangers consist of round tubes, the rows of tubes in flat tube heat exchangers have a special profile (see illustration). This special tube profile offers advantages over the round profile in certain applications. Flat tube heat exchangers require less installation space than smooth tube heat exchangers with the same exchange area and are therefore also lighter.

Air-water / air-air heat exchanger as smooth tube heat exchanger up to 1,000 ° C Smooth tube heat exchanger as an air / water heat exchanger In the case of air-water heat exchangers (also called gas-water heat exchangers), a temperature exchange takes place between a gas (usually air) and a liquid. As a rule, the liquid medium flows inside the pipes, while the gaseous medium flows around the pipes outside the pipes. Smooth tube heat exchangers can cover various areas of application: heating, cooling and condensing as well as heat recovery. Smooth tube heat exchanger as air-to-air heat exchanger Smooth tube heat exchangers are also often used as air-to-air heat exchangers. In this application, a gas (e.g. exhaust air or exhaust gases) flows inside the pipes and a gas (e.g. fresh air) outside the pipes around the pipes.

Temperature exchange between a gas and a liquid In the case of air-water heat exchangers (also called gas-water heat exchangers), there is a temperature exchange between a gas (usually air) and a liquid. Finned heat exchangers can cover various areas of application: - heating and evaporating, - cooling and condensing as well as heat recovery. In this context, lamellar heat exchangers are also called air heaters or air coolers. Air-water heat exchangers are often also used as exhaust gas heat exchangers or flue gas heat exchangers in order to recover the energy from warm or hot exhaust gases. Lamella packs for a large exchange area In order to achieve the largest possible exchange surface between the air and the medium (liquid) within the heat exchanger, lamellas or lamella packs are attached to the pipe system.

Efficient use of waste heat (up to 1.000 °C) In many production processes waste heat occurs in form of hot air which is put out to the environment without any use. Very often these hot gases are contaminated air. On the other side clean (cold) air must be warmed up for the production process. In these cases cross flow heat exchanger can reduce the energy costs. The hot air stream will be conducted in the cross or counter flow method over the cold air inside the cross flow heat exchanger. Though both air streams are strictly separated because of the construction of the heat exchanger and they don´t get mixed (leakage less than 0,5 %). Only the energy of the hot waste stream is transferred to the cold clean stream.

Temperation of fluids Pillow plates are used everywhere where liquids must be temperated. In dependence of application the liquids can be cooled or heated. Cause of this wide range of applications pillow plates are used in the process industry, in the cooling industry and in a lot of other industries. Pillow plates are also know as heat exchanger plates, evaporator plates, cooling plates /sheets and thermo plates / sheets. Pillow plates as air-/water-heat exchanger Additionally to the temperation of liquids pillow plates are also used as air-/liquid heat exchangers. In case of polluted or wasted air and if there are high demands for cleaning, more and more pillow plates are used as air-/water-heat exchanger. The large exchange surface and the good possibilities for cleaning are important features for this type of heat exchanger.

Air heat exchangers as finned tube heat exchangers Heat transfer between a gaseous media and a liquid Finned tube heat exchangers are often called air/water heat exchangers or gas/water heat exchangers. Heat transfer between a gas (for ex. air) and a liquid (for ex. water) takes place in the air-/water heat exchangers. To improve the thermal output transfer from the gas to the liquid, fins made of well heat transferring materials are put on the tubes. Very often air-/water heat exchangers are used as exhaust heat exchanger to gain the energy out of warm or hot exhaust fumes. Finned tube heat exchangers can also be used as air heater, air cooler or condenser.

Heat recovery with the help of heat exchangers In industry, waste heat occurs at many points in the production process, which is often released into the environment without being used. In many cases, energy is even used to cool the waste heat flows from production so that they can be released into the environment. Heat exchangers (also called heat exchangers) are used for heat recovery so that the waste heat generated in the production process can be used again in the company. Gaseous or liquid media Waste heat can be in the form of gaseous media (e.g. warm exhaust air, steam, exhaust gases, etc.) or in the form of liquid media (e.g. hot water or other liquids). With the help of heat exchangers, the waste heat can be recovered from both gaseous and liquid media and then made available to the production process at a suitable point as energy in gaseous or liquid media. This process is known as energy recovery or also as heat recovery.

Finned tubes for efficient heat exchange Large exchange area in a small space By using finned tubes (also known as corrugated rib tubes), optimal heat exchange can be achieved in a small space. By applying so-called ribs to smooth tubes, the exchange area of ​​the tubes is increased considerably. Finned tubes are usually used where an optimal temperature exchange between gaseous media and liquids is to be achieved. Different designs for every purpose In many cases, finned tubes are built into production machines as a component in machine and apparatus construction. Finned tubes can be designed for a variety of special application conditions. The length, the design and the ribbing can be individually adapted.

Generate cold water / flake ice continuously Proven use Falling film chillers have been used in various industrial sectors for many years. Water runs over the heat exchanger plates from a trough arranged above the heat exchanger plates. This enables a continuous heat transfer between the water and the cooling medium. Outstanding advantages The arrangement of holes in the upper tub enables targeted water distribution on the heat exchanger plates. The construction using a perforated tub has the further advantage that no contamination occurs and the liquid to be cooled is evenly distributed. Made of stainless steel The trickle cooler is made entirely of stainless steel. You can choose between different materials (see data sheet). Low boiling delay Our trickle coolers are characterized by the fact that the boiling delay is low in flooded operation, whereby overheating can be selected in dry expansion operation.

Universal use for a wide range of applications Ice stores are used in more and more areas of technology. In addition to the classic areas of application in refrigeration, air conditioning and commercial kitchen technology, ice storage systems and cold water systems are increasingly being used in process engineering systems. Cold water for subsequent production processes is generated with ice storage tanks. Ice storage systems thus provide stored cold. Use of cheap night electricity tariffs With the help of ice storage technology, cheap nighttime electricity tariffs can be used. During the night, ice is continuously built up on the plates or on the pipe coils. This ice is then available during the day as stored cooling capacity. This can significantly reduce energy costs. The cooling units can also be made smaller when using ice storage systems.

Know-how for special applications There are applications with very special requirements for the heat exchanger. Due to its decades of experience, Anthermo GmbH has the necessary know-how to be able to build special heat exchangers for special applications. So every year we build numerous heat exchangers that are a bit off the standard. Dimensioning with EDP programs With the help of EDP programs, Anthermo GmbH is also able to dimension and technically design special heat exchangers. The technical design and dimensioning is strictly based on the specifications and requirements of the customer. After the design, a three-dimensional CAD model is created. The CAD drawing approved by the customer forms the basis for production with the most modern IT-supported production systems.

Temperature control of liquids Tube coil heat exchangers (so-called tube cooling coil heat exchangers) are generally used to control the temperature of liquids. This system can also be used to heat or cool liquids in a controlled manner. Due to their special shape, pipe coil heat exchangers are sometimes also called hairpin heat exchangers. Inexpensive applications The simple and solid structure enables it to be used in cost-effective applications. Coiled tube evaporator systems are ideally suited for brine and glycol applications. Classic variant Coiled tube evaporator systems are a classic and proven variant in the field of heat exchanger systems. Coiled tube heat exchangers are often used in ice storage systems or in the production of cold water units. In ice storage systems, coils can be used to achieve an even build-up of ice around the coils.

Tubes wound into a spiral shape Coaxial heat exchangers consist of two or more pipe coils, which are routed into one another and wound up in a spiral shape. The primary medium runs in countercurrent to the secondary medium. Fast temperature exchange This countercurrent design achieves a very rapid temperature transition with high efficiency between the liquids. Due to the spiral shape, the rapid temperature exchange between the liquids is achieved in a very small space. No cleaning or maintenance required Another advantage is the encapsulation of both liquids from environmental influences. There is practically no cleaning or maintenance effort due to pollution from the environment. The coaxial heat exchanger also does not require any seals that require maintenance. Condenser or evaporator function Coaxial heat exchangers can be used for both condenser and evaporator functions.

Customized air-water heat exchangers for industrial use Three types of air-water heat exchangers Three different designs o air-water heat exchangers The Anthermo GmbH delivers three different designs of air-water heat exchangers: Finned tube heat exchangers Lamella heat exchangers Straight tube heat exchangers These heat exchangers are designed in a way, that inside the tube water or another liquid circulates. The air flows around outside the tubes or the fins/lamellas. The connection between the fins and the tube is used to enlarge the space for heat transfer between the liquid and the gas fluid. The technical figures (for ex. amount of air, temperature, pressure, waste of air) can be different for the air-water heat exchanger. Also the operating conditions and the environment conditions can vary from application to application.

Customized air-air heat exchanger for the industry (up to 1.000°C) Hot outgoing air and cold incoming air Very often hot exhaust gas gets out in the environment without any use. On the other hand cold incoming air must be lead into the production process and shall be warmed. This occurs for example very often within drying technology. In this case air-air heat exchangers can be used very efficient in heat recovery. As result you have great potential to save energy expenses. Three types of air-air heat exchangers The Anthermo GmbH delivers three types of different air-air-heat exchangers: cross-flow heat exchanger straight-tube heat exchanger flat-tube heat exchanger The technical figures (for ex. amount of air, temperature, pressure, waste of air) can be different for the air-air heat exchanger. Also the operating conditions and the environment conditions can vary from application to application.

For heating system, made by casting and machining, material annealed cast iron KTH35010, sizes Ø46mm x 15mm, weight 0,1kg, annual demand 30.000pcs

IFYIL PELLET HEATING SYSTEM STOVE BOILERS WOOD HVAC Özerteknik A.Ş. Company has been existing in heating sector for 28 years and established İfyıl Termo İklimlendirme San. ve Tic. Ltd. Şti. Industry Company in 2009 for the brand name “IFYIL” offering modern innovative solutions for heating systems. İfyıl Termo factory was established on 6.000 m2 of a total area of 20.000 m2. Company has already achieved an image and prestige on the market with 70 professional staff with the most modern know-how. In this regard, priorities of R & D Department of İfyıl Termo İklimlendirme are efficiency, energy saving and comfort. İfyıl Termo already has been exporting to more than 25 countries with increasing number of demands. İfyıl quality has been embracing the world day by day with various eco-friendly models. İfyıl stoves have unique ergonomic design with its compact, modern appearance and all in one mechanical structure.

We print your pictures according to your wish to fabric and make them acoustic panels. Max width 140cm max height 240cm

For all barbecue enthusiasts, our specially prepared grill charcoal ensures perfect cooking of every piece of meat. Versatile and highly efficient, our grill charcoal allows for quick ignition and attaining high and long-lasting temperatures for carefree grilling. Whether you're a professional chef or an amateur, our grill charcoal will elevate your passion for grilling to a whole new level. With various packaging options of 2.5 kg, 3 kg, 4 kg, and 5 kg, tailored to your needs, and a granularity ranging from 20 to 80 mm, our grill charcoal becomes the ideal companion for all your barbecue adventures.

Key characteristics and advantages of this film: Three-layer structure : The film has a complex three-layer structure, which makes it durable and reliable. Heat-Sealable Layers : Two heat-sealable layers provide excellent sealing characteristics, making this film an ideal choice for packaging and sealed packaging solutions. Antistatic properties : The material does not slip and does not accumulate a static charge, which makes it convenient and safe to use. Optical Properties : The transparency and optical clarity of this film ensures that the packaged product remains visible and attractive to customers. Anti-glare properties : Additional anti-glare properties help prevent glare and reflections on packaging, making it more attractive and informative. Food Approval : This film is used to package a wide range of food products, which emphasizes their safety and compliance with quality standards.

Ideal for product viscosities between 50 and approximately 500 mPas

Sterile heat-exchangers are shell and tube heat exchangers designed for the pharma industry. Since pharma applications often require high engineering standards these heat-exchangers can be supplied with some special features:

Reliable temperature conditioning of viscous media up to 10.000.000 mPas

Based on years of experience in the field of test bench metrology in the automotive industry, EP develops test bench solutions for various applications. We build test benches for testing automotive components such as heat exchangers, intercoolers, filters, valves and others. These are test benches on which e.g. supplier parts for the automotive industry are tested in production. Our specialist knowledge of the industry makes us a strong partner in this area.

Where can I find boiler repair near me in Plymouth? The Plumbing Doctor is your go-to solution for boiler repairs and all types of heating work. You can contact us for any of your heating needs, including: Boiler repair, installation, or servicing Valves, pumps, and thermostats Radiators and heated towel rails Immersion heater design and installation Unvented hot water system installation Landlord safety certificates We also handle all pipework Are you finding it hard to stay warm this winter? If your boiler no longer seems as efficient, you may need a professional boiler service. Do not wait for your central heating system to break down. If you want to stay safe and warm this winter, get on the phone and call us today.

With years of experience in all aspects of both domestic and commercial plumbing, The Plumbing Doctor provides a comprehensive service from initial advice through to final completion. Whether you have a burst pipe at your business or you’re looking to install a new outside tap at your home, our team of plumbers will deliver an exceptional service from start to finish. We also provide a rapid response emergency call out service to clients in Plymouth and all surrounding areas .

We offer a comprehensive central heating installation service. Whether your home is need of a brand-new central heating system, a few extra radiators or an upgrade to your existing system, we can help! With more than 10 years of experience in the heating and plumbing industry, we are experts in our field. We have the skills, know-how and capability to install new systems or perform upgrades to suit your needs. We pride ourselves on working professionally, quickly and cleanly to ensure your central heating installation is accomplished with minimal fuss and disruption to your home.